Plasti Dip Wheels How Many Cans

How Many Cans of Plasti Dip Do I Need for My Wheels?

So, you're ready to give your wheels a stylish makeover with Plasti Dip. That's awesome! But before you head to the store, a crucial question needs answering: How many cans of Plasti Dip will you need? There's no one-size-fits-all answer, as it depends on several factors. Let's break it down!

Factors Affecting Plasti Dip Can Count

Several key elements influence the number of cans you'll require for a complete and even coat on your wheels:

• Wheel Size: Larger wheels (18", 20", 22" etc.) naturally require more Plasti Dip than smaller ones (15", 16", 17"). Larger surface area = more dip!

• Number of Wheels: This is an obvious one! Four wheels will obviously need more Plasti Dip than two.

• Number of Coats: For a truly durable and professional-looking finish, at least three coats are recommended. More coats might be necessary depending on the desired opacity and coverage.

• Wheel Design: Wheels with intricate designs or deep recesses will need more Plasti Dip to ensure complete coverage compared to simpler, flatter designs. Those nooks and crannies add up!

• Type of Plasti Dip: While most Plasti Dip cans are similarly sized, slight variations might affect the coverage. Always refer to the can's instructions for suggested coverage per can.

Estimating Your Plasti Dip Needs

To get a good estimate, consider these guidelines:

• Average Wheel: A single can of Plasti Dip typically covers one standard-sized wheel with two coats. Therefore, four wheels would require at least four cans for a two-coat application.

• Additional Coats: For that superior, durable, and even finish, plan for at least three coats. This means you'll likely need more cans.

• Larger Wheels/Complex Designs: For wheels larger than 17 inches or those with complex designs, aim for approximately 1.5 cans per wheel for a two-coat application. That could mean 6 cans for a four-wheel job and even more if using three coats.

Don't Run Short! Always Buy Extra.

It's always better to have a little extra Plasti Dip than to run out mid-project. A shortage can ruin the consistency of your coat and lead to a less-than-perfect finish. Buying one or two extra cans provides a safety net, ensuring your project is completed flawlessly.

Preparation is Key

Before starting your project, thoroughly clean your wheels. This step is crucial for optimal adhesion. Properly cleaning will contribute to a smoother and longer-lasting finish. A well-prepared surface is the key to a successful Plasti Dip job.

By considering these factors and adding a little extra for safety, you can confidently purchase the correct amount of Plasti Dip for your wheel project. Happy dipping!